Simply blow into the sterile filter, which fairly pressurizes the carboy, causing beer to waft out. Attach the sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the stainless racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces beer out through the racking cane, starting the Siphon. There is not any wish to worry about contamination from your mouth, as the sanitary filter removes 99.98 percent of airborne bacteria. Sterile Siphon includes: 26 inch stainless racking cane red sediment reduction tip orange carboy hood for 5 gallon Carboy5′ 3/8 inch ID vinyl tubing stainless hose clamp sterile air filter about the white sterile filter: there are two sides to the filter – an “in” and an “out”. the direction you use doesn’t matter, on the other hand, you wish to have to take note of which way you first push air through it and at all times keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air waft going one direction when the use of it. The filter will have to never get wet, so don’t try and sanitize it by dunking it in sanitizer. If you wish to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the “in” of the filter and store in a zip-lock bag.
26 inch stainless racking cane
Red sediment reduction tip
Rubber carboy blow off hood w/white caps (3, 5, 6, 6.5 gallon smooth neck)
5′ 3/8 inch
Sterilized air filter